1. When the stabilized power supply is powered on, please do not disassemble the stabilized power supply or pull the input and output connections of the stabilized power supply at will to prevent electric shock or other electrical safety accidents.
2. The input and output wiring of the stabilized power supply must be arranged reasonably to prevent trampling and wear, which may cause leakage accidents.
3. The stabilized power supply must be reliably grounded. The user is responsible for the electric shock or human injury caused by the operation of the ungrounded wire.
4. The ground wire of the stabilized power supply cannot be connected to public welfare facilities such as heating pipes, water supply pipes, gas pipes, etc., so as not to infringe the rights of third parties or cause harm.
5. The input and output connections of the stabilized power supply should be checked regularly to avoid loosening or falling off, thereby affecting the normal use and safety of the stabilized power supply.
6. The selection and matching of the connecting wire of the small voltage stabilizer must meet the requirement of the connecting wire that can carry enough current capacity.
7. The small AC voltage stabilizer should be handled with care to avoid severe vibration when working;
8. Ensure that the carbon brush spring of the small regulator has sufficient pressure to avoid flashover on the contact surface of the carbon brush and the coil;
9. Non-professionals, please do not disassemble or repair the regulated power supply;
10. During the use of the small AC voltage stabilizer, remember to touch the fire to avoid short circuit and fire accidents.
